Next, in the board configuration window, you will need to set the appropriate Instacal settings according to the hardware switches and jumpers of the board. Please note, that hardware jumpers and switches are found mostly on ISA boards (non-PnP).Īfter all hardware switches and jumpers are properly set and the board is physically installed in the PC, you can then install the board in InstaCal by selecting the appropriate board from the list: Based on that, the board jumpers and/or switches (please refer to your hardware User’s Manual) must be set to available resources (Base Address, DMA, IRQ).
#INSTACAL DOES NOT SEE AT DAQ BOARD FOR FREE#
In order avoid these problems, first check for free resources available on the specific system through Windows Device Manager. The assigned board resources are in conflict with other devices on the system.The board’s hardware configuration does not agree with the InstaCal configuration.Selecting the improper board name from the InstaCal list.Most often, the "A/D not responding" error occurs in conjunction with non-P&P boards. MCC’s ISA, PC104 and PPIO boards are non-P&P. Typically, all Measurement Computing PCI, cPCI, USB, and PCMCIA boards are P&P. Meanwhile, non-PnP boards must be manually installed from the InstaCal provided board list. Plug&Play boards are automatically detected and installed by InstaCal.
The InstaCal program can handle both Plug & Play (PnP) and non-P&P boards.
0 kommentar(er)
